Instruction 148R9527 148R9527 GDA, GDC, GDHC, GDHF, GDH fig. 1 n n n Standard LCD display Low temperature n n IP 65 EExd fig. 3 fig.
Electrical connection for all models fig. 4 Jumper connection for all models fig.
Adjusting low/high alarm values fig. 6 Setting of address when communicating to Danfoss m2 fig.
Setting of address when communicating to Danfoss m2 (continued) fig.
• • ENGLISH Refrigerants GD can be used for the following refrigerants Ammonia • Type GDA • 0-100 ppm • 0-1,000 ppm • 0-10,000 ppm • 0-30,000 ppm • Electrical installation (fig. 4 and 5) Earth/Ground connection must be made when using the standard, LCD display, or EExd enclosure. The safety of the equipment is dependent on the integrity of the power supply and the earthing of the enclosure.
RI7HA102 © Danfoss A/S (RC-CM / MWA), 12-2003
RI7HA102 © Danfoss A/S (RC-CM / MWA), 12-2003 7
RI7HA102 © Danfoss A/S (RC-CM / MWA), 12-2003
