User guide

Danfoss Heating

Press and hold the PROG button for 5 seconds until the display

returns to previous RUN mode (Fig. 21).

Press the PROG button, the display will change to show the default

days assigned to “A” days (MON, TUE, WED, THU, FRI) (Fig. 22).

Use the + or - buttons to scroll forwards or backwards through the

days of the week.

To deselect a day press the V button, (for example TUE). To select a

day press the Λ button (for example SUN).

Any deselected days are automatically assigned to “B” days.

Programming “A” days and events

a) Press the PROG button, the  rst preset time. (Event 1 for

Programme A) appears in display (Fig. 23).

b) Use the + or - buttons to adjust the TIME (press and hold to

change in 10 minute increments).

Fig. 21 Fig. 22

Fig. 23