Specifications

Analog inputs
Number of analog inputs 2
Terminal number 53, 54
Terminal 53 mode Parameter 6-19: 1 = voltage, 0 = current
Terminal 54 mode Parameter 6-29: 1 = voltage, 0= current
Voltage level 0 - 10V
Input resistance, R
i
approx. 10kΩ
Max. voltage 20V
Current level 0/4 to 20mA (scalable)
Input resistance, R
i
<500Ω
Max. current 29mA
Analog output
Number of programmable analog outputs 2
Terminal number 42, 45
1)
Current range at analog output 0/4 - 20mA
Max. load to common at analog output 500Ω
Max. voltage at analog output 17V
Accuracy on analog output Max. error: 0.4% of full scale
Resolution on analog output 12 bit
1) Terminal 42 and 45 can also be programmed as digital outputs.
Digital output
Number of digital outputs 2
Terminal number 42, 45
1)
Voltage level at digital output 17V
Max. output current at digital output 20mA
Max. load at digital output 1kΩ
1) Terminals 42 and 45 can also be programmed as analog output.
Control card, RS-485 serial communication
Terminal number 68 (P, TX+, RX+), 69 (N, TX-, RX-)
Terminal number 61 Common for terminals 68 and 69
Control card, 24V DC output:
Terminal number 12
Max. load enclosure frame H1-H8 80mA
Relay output
Programmable relay output 2
Relay 01 and 02 01-03 (NC), 01-02 (NO), 04-06 (NC), 04-05 (NO)
Max. terminal load (AC-1)
1)
on 01-02/04-05 (NO) (Resistive load) 250V AC, 3A
Max. terminal load (AC-15)
1)
on 01-02/04-05 (NO) (Inductive load @ cosφ 0.4) 250V AC, 0.2A
Max. terminal load (DC-1)
1)
on 01-02/04-05 (NO) (Resistive load) 30V DC, 2A
Max. terminal load (DC-13)
1)
on 01-02/04-05 (NO) (Inductive load) 24V DC, 0.1A
Max. terminal load (AC-1)
1)
on 01-03/04-06 (NC) (Resistive load) 250V AC, 3A
Max. terminal load (AC-15)
1)
on 01-03/04-06 (NC) (Inductive load @ cosφ 0.4) 250V AC, 0.2A
Max. terminal load (DC-1)
1)
on 01-03/04-06 (NC)
(Resistive load)
30V DC, 2A
Min. terminal load on 01-03 (NC), 01-02 (NO) 24V DC 10mA, 24V AC 20mA
Environment according to EN 60664-1 Overvoltage category III/pollution degree 2
1) IEC 60947 parts 4 and 5.
Control card, 10V DC output
Terminal number 50
Output voltage 10.5V ±0.5V
Max. load 25mA
General Specifications and ... VLT HVAC Basic Drive Design Guide
MG.18.C2.02 - VLT
®
is a registered Danfoss trademark 87
8 8