Operating instructions

3.1.5 Background Knowledge
The Danfoss LonWorks Option Card is designed to communicate with any system complying with the FTT and 78Kbps LonWorks standard. Familiarity
with this technology is assumed. Issues regarding hardware or software produced by other manufacturers, including commissioning tools, are beyond
the scope of this manual and are not the responsibility of Danfoss.
For information regarding commissioning tools or communication with a non-Danfoss node, please consult the appropriate manuals.
3.1.6 Related Literature for the VLT HVAC Drive
Title Literature no.
VLT
®
HVAC Drive Operating Instructions
MG.11.Ax.yy
VLT
®
HVAC Drive Design Guide
MG.11.Bx.yy
VLT
®
HVAC Drive Programming Guide
MG.11.Cx.yy
The following literature is available for the FC 100 series:
Please also refer to
www.danfoss.com/BusinessAreas/DrivesSolution for additional information.
3.1.7 LonMark Certification
The LonWorks option is conform to the LonMark standards and is certified towards LonMark ver. 3.4
3 Introduction VLT® FC 100 LonWorks
8 MG.11.E2.02 - VLT
®
is a registered Danfoss trademark
3