Operating instructions

8.3 Parameter Group 11
11-00 Neuron ID
Range: Function:
View the Neuron chip's unique Neuron ID number.
0 N/A* [0 - 0] View the Neuron chip's unique Neuron ID number.
11-10 Drive Profile
Option: Function:
This parameter allows selecting between LONMARK Functional Profiles.
[0] * VSD profile The Danfoss Profile and the Node Object are common for all profiles.
11-15 LON Warning Word
Range: Function:
0 N/A* [0 - FFFF ] This parameter contains the LON specific warnings.
Bit Status
0 Internal fault
1 Internal fault
2 Internal fault
3 Internal fault
4 Internal fault
5 Reserved
6 Reserved
7 Reserved
8 Reserved
9 Invalid type change for changeable types
10 Initialization error
11 Internal communication error
12 Software revision mismatch
13 Bus not active
14 Option not present
15 LON input (nvi/nci) exceeds limits
11-17 XIF Revision
Range: Function:
0 N/A* [0 - 0] This parameter contains the version of the external interface file on the Neuron C chip on the LON
option.
11-18 LonWorks Revision
Range: Function:
0 N/A* [0 - 0] This parameter contains the software version of the application program on the Neuron C chip on
the LON option.
11-21 Store Data Values
Option: Function:
This parameter is used to activate storing of data in non-volatile memory.
[0] * Off Store function is inactive.
[2] Store all setups
Stores all parameter values in the E
2
PROM. The value returns to Off when all parameter values have
been stored.
8 Parameters VLT® FC 100 LonWorks
54 MG.11.E2.02 - VLT
®
is a registered Danfoss trademark
8