Operating instructions

5.2.2 Network variable description - FC VSD Profile - output

Status Word

Variable name: SNVT type: State:

nvoStatusWord SNVT_state Boolean 1 bit x 16

This variable is a 16-bit word providing status information on the frequency converter. For more information on the status word, please refer to the

Danfoss FC Control Profile

section.

NB!

Please note that in the representation of the Status Word in the LonMaker Browser, the Least Significant Bit (LSB) is to the far left.

Drive Output [%]

Variable

name:

SNVT

type:

Value:

nvoOutputPcnt SNVT_lev_percent Min. Max. Resolution:

-163.840 % +163.840 % 0.005 %

In open loop operation, this variable contains the frequency converter output frequency in percentage, within the reference range.

In closed loop operation, this variable contains the frequency converter feedback signal, within the reference range.

Drive Output [Hz]

Variable

name:

SNVT

type:

Value:

nvoOutputHz SNVT_freq_hz Min. Max. Resolution:

0 Hz 6,500 Hz 1 Hz

This variable displays the actual output of the frequency converter motor frequency in Hz.

kWh Counter [kWh]

Variable

name:

SNVT

type:

Value:

nvoDrvEnrg SNVT_elec_kwh_l Min. Max. Resolution:

0 kWh 219,748,364.8 kWh 1 kWh

This variable contains the power consumption of the motor in kWh measured as a mean value over a one hour period.

VLT® FC 100 LonWorks 5 Configuration of the system

MG.11.E2.02 - VLT

is a registered Danfoss trademark