Operating instructions

5.1.3 FC VSD Profile

The FC VSD Profile describes all Danfoss VLT specific network variables.

Input variables

Variable Function Variable Name SNVT type Profile FC 100 par.

Start/Stop nviStartStop SNVT_switch FC VSD CTW/reference

Control word nviControlword SNVT_state FC VSD CTW

Reset fault nviResetFaut SNVT_switch FC VSD CTW

Reference [%] nviRefPcnt SNVT_lev_percent FC VSD Reference

Reference [Hz] nviRefHz SNVT_freq_hz FC VSD Reference

CL Setpoint 1 nviSetpoint1 SNVT_lev_percent FC VSD 20-21

CL Setpoint 2 nviSetpoint2 SNVT_lev_percent FC VSD 20-22

CL Setpoint 3 nviSetpoint3 SNVT_lev_percent FC VSD 20-23

Bus feedback 1 nviFeedback1 SNVT_lev_percent FC VSD 8-94

Bus feedback 2 nviFeedback2 SNVT_lev_percent FC VSD 8-95

Bus feedback 3 nviFeedback3 SNVT_lev_percent FC VSD 8-96

Digital/relay outputs nviDigiOutput SNVT_state_64 FC VSD 5-90

Analog output (42) nviAnOut1 SNVT_lev_percent FC VSD 6-53

Analog output (X30/8) nvi101AnOut1 SNVT_lev_percent FC VSD 6-63

Analog output (X42/7) nvi109AnOut1 SNVT_lev_percent FC VSD 26-43

Analog output (X42/9) nvi109AnOut2 SNVT_lev_percent FC VSD 26-53

Analog output (X42/11) nvi109AnOut3 SNVT_lev_percent FC VSD 26-63

Setting of RTC nviTimeStamp SNVT_time_stamp FC VSD 0-70

ECB option Mode nviECBMode SNVT_state FC VSD 31-00

ECB By-pass activation nviECBActivation SNVT_switch FC VSD 31-19

Parameter access command nviParamRequest UNVT_param_request FC VSD -

5 Configuration of the system VLT® FC 100 LonWorks

MG.11.E2.02 - VLT

is a registered Danfoss trademark