Installation guide

6 Menu operation RC.1N.H1.02 © Danfoss 06/96 AKC 24A Version 1.0x
|
Digital Output DO1 - DO3 settings
Settings
4:03
DO1 High % Setting of limit value where output DO1 cuts out
0 100
4:03:01
|
DO1 Del. s Setting of time delay for DO1 (seconds)
0 300
4:03:02
|
DO2 High % Setting of limit value where output DO2 cuts out
0 100
4:03:03
|
DO2 Del. s Setting of time delay for DO2 (seconds)
0 300
4:03:04
|
DO3 Low % Setting of limit value where output DO3 cuts out
0 100
4:03:05
|
DO3 Del. s Setting of time delay for DO3 (seconds)
0 300
4:03:06
|
Service Mode Service function
5
Measurements Measurements
5:01
0 - 10 Volt Voltage measured at input
5:01:01
|
4 - 20 mA Current measured at input
5:01:02
|
P1 Bar Pressure measured with pressure transmitter connected to P1 inlet
5:01:03
|
P2 Bar Pressure measured with pressure transmitter connected to P2 inlet
5:01:04
|
S5 °C Temperature measured on inlet
5:01:05
|
S6 °C Temperature measured on inlet
5:01:06
|
S7 °C Temperature measured on inlet
5:01:07
|
S8 °C Temperature measured on inlet
5:01:08
|
S9 °C Temperature measured on inlet
5:01:09
|
S10 °C Temperature measured on inlet
5:01:10
|
DI 1 Statement of force closing at terminal DI 1
5:01:11