Installation guide

2 Menu operation RC.1N.H1.02 © Danfoss 06/96 AKC 24A Version 1.0x
System survey
A refrigerating plant fitted with ADAP-KOOL
®
refrigeration controls will mostly consist of several
controllers where each controller will regulate its own refrigeration appliance/cold room.
The system has been designed in such a way that contact can be made to each and every
controller via a data communication system. One specific controller is selected, and it will now
be possible to make settings and readouts for this unit.
The individual controllers can be operated in two ways:
1. With control panel type AKA 21.
Use this document when operation takes place in this
way.
2. With PC and system software type AKM.
Operation
Validity
This menu operation (dated June 1996), applies to AKC 24A with the following code
number:
084B2029 that is fitted with software version 1.0x.