Operating instructions
Manuals
Brands
Danfoss Manuals
Domestic Appliances
Commissioning DHP-M
31
32
33
34
35
36
37
38
39
40
Table Of Contents
DHP-M
Table of Contents
1 About documents and decals
1.1 Introduction
1.2 Symbols in documents
1.3 Symbols on decals
1.3.1 General
1.3.2 Electrical components
1.3.3 Pipe connections
2 Important information/Safety instructions
2.1 General safety precautions
2.2 Refrigerant
2.2.1 Refrigerant
2.2.2 Fire risk
2.2.3 Toxicity
2.2.4 Working on the refrigerant circuit
2.2.5 Scrapping
2.3 Electrical connection
2.4 Water quality
2.5 Commissioning
3 Checking piping and electrical installation
3.1 Checking piping installation
3.2 Checking electrical installation
4 Filling and bleeding
4.1 Filling and bleeding the water heater and heating system
4.2 Filling and bleeding the brine circuit
4.2.1 Introduction
4.2.2 Filling
5 Configuration of control system
5.1 Display description
5.2 Select display language
5.3 Setting date and time
5.4 Adjusting the indoor temperature
5.5 Adjusting the Heat Curve
5.6 Heating Settings
5.7 Network connection, Online and setting up primary and secondary functionality
6 Manual test
6.1 Activate manual test
6.1.1 Testing the circulation pump (HP)
6.1.2 Testing the brine pump
6.1.3 Testing the system pump
6.1.4 Testing the compressor
6.1.5 Exiting manual test
6.1.6 Insulating pipes
7 Starting and tuning the system
7.1 Enable functions
7.2 Activate / deactivate functions
7.3 Selecting operating mode
7.4 System information
7.5 Checking sensors
7.6 Checking abnormal noise
7.7 Activating accessories
7.8 Distribution circuits
7.9 Completed commissioning
8 Installation protocol and customer information
8.1 Installation protocol
Commissioning
DHP-M
Danfoss Heating Solutions
VIJSE302
37
1
...
...
35
36
37
38
39
...
40
