Operating instructions

Exchange valve for hot water production
1. Press in the upper left corner of the Start screen
2.
Press
3.
Continue with to the menu page with exchange valve settings.
4. Activate the exchange valve by pressing
.
5. Check that the indicator on the upper side of the exchange valve changes position.
6.
Press to return to the Menu screen.
Auxiliary heating
1. Press in the upper left corner of the Start screen
2.
Press
3.
Continue with to the menu page for auxiliary heating settings.
4. Start auxiliary heating by pressing
. The system pump will start automatically.
5. Check that the auxiliary heater is working by checking that the temperature of the supply line rises.
6.
Press to return to the Menu screen.
Commissioning DHP-M
VIJSE302 Danfoss Heating Solutions
32