User Manual

8
Installation Guide CCR3 Controller
DEN-SMT/SI VI.D3.A2.02 Heating Solutions
9. REAL TIME CLOCK SETTINGS (code 576)
From ACCESS CODE menu enter code: 576
(procedure in chapter 7). The Real Time menu is
displayed as detailed in the table below.
The arrow keys “▲/▼”move the menu windows,
the “+/-“keys change the values in the window
selected by the arrows.
No LCD Display INSTALL MENU - FUNCTION DESCRIPTION
42 Real Time
Menu
Information about menu: real Time
43 RealTime
12:00:00
Sets the real time clock “hour”
44 RealTime
12:00:00
Sets the real time clock “minute”
45 RealTime
12:00:00
Sets the real time clock “second”
46 Year Sets the year for the current date
47 Month Sets the month for the current date
48 Day Sets the day for the current date
49 Ecs?
+ YES
Exit windows from Install Menu. Enter “+” to closed setting or basic menu will close automatically after 4 minutes
To exit the setting menu, press the up arrow key after
changing the last setting. The setting menu is closed
automatically after 4 minutes of inactivity.
No LCD Display BASIC MENU - FUNCTION DESCRIPTION
38 BMS TYPE
…….
Type of date transmission:
ModBus 96 (9.600)
Mod Bus 19 (19.000)
ModBus 38 (38.400)
FBus
Factory setting: ModBus 96
39 DateForm Form of date display:
YY-MM-DD – year, month, day
YY-DD-MM – year, day, month
DD-MM-YY – day, month, year
MM-DD- YY – month, day, year
Factory setting: YY-MM-DD
40 Reset
…….
Reset to factory settings
Yes - return to factory settings
No – keep adjust settings
Note: To complete reset procedure turn CCR3 o and back on.
41 Ecs?
+ YES
Exit windows from Install Menu. Enter “+” to closed setting or basic menu will close automatically after 4 minutes