Installation guide

AKM/AK Monitor/AK Mimic Installation guide RI8BP602 © Danfoss 10/2011 9
3. First time the programme is started
Setting
After installation the programme can now be started in one of the
following two ways:
- Automatic start-up (selected during the installation).
- Start-up from Windows.
When the programme is started, the following two dispalys
appear:
Set the desired function for the Screen saver.
(This function is explained on the previous page under Advanced.)
Press OK and continue to the following dialogue box, where the
plant data can be set.
Warning! Do not use the “ENTER” key until all the fields have been
filled in.
The display only appears once during the installation. After that, it
is not possible to make settings or changes.
Please fill in all the fields. The information may be required when
service has to be carried out at a later date.
In the example above it is indicated which information may be
provided at the given positions.
When the programme has been started, proceed by keying in
initials and Password.
A user with the initials AKM1 and keyword AKM1 has now been
establis hed. Use it for the establishment of a new “superuser”
having access to all functions.
Delete the “AKM1” user when general access to the system is no
longer required.
When the programme is started it has to know which plant and
controllers there has to be connection to
The settings are shown on the following pages;