Installation guide

18 Installation guide RI8BP602 © Danfoss 10/2011 AKM/AK Monitor/AK Mimic
Appendix 1 - continued
5. Speed
Later, when the communication functions satisfactorily, you may
raise the speed of all relevant TCP/IP servers to, say, 38400 baud.
Things to be considered during installation
An unintentional action may produce the result that the data com-
munication fails.
The AKM programme constantly checks that there is contact to the
server connected to the PC.
By using the AKM programme’s Scan function it can likewise be
checked whether the connection to the plant’s gateway is intact.
Scan for time, for example.
AK Monitor /MIMIC
If AK Monitor / MIMIC has a direct connection to LAN via the net
card, this must be defined in AK Monitor / MIMIC. Select channels
for WinSock.
Set IP addresses in the system's TCP/IP gateway.