Brochure

2
Please fax/email orders to:
416-352-5981/[e-mail]
For technical assistance call:
Toll Free: 866-375-HVAC (4822)
www.na.heating.danfoss.com
Typical Installation Conguration = Operator Type
Free-Standing Radiators
The freestanding hot water or
2-pipe low pressure steam radiator
is located where air circulation is
unobstructed and passes freely over
the operator.
=
Valve -mounted dial and sensor,
standard or tamper resistant
models.
Always install these operators in
a horizontal position.
Free-Standing Radiators
Freestanding hot water or 2-pipe
low pressure steam radiator. Air
circulation does not pass freely over
the operator due to furniture, drapes,
coverings, etc.
=
Valve -mounted dial
with remote sensor,
standard or tamper- resistant
models.
The sensor can be mounted on
a wall up to 6 feet away in a
location free of drafts.
Baseboard/Convectors
The hot water or 2-pipe low
pressure steam n-tube baseboard
or convector is located where air
circulation is unobstructed and
passes freely over the operator.
=
Valve -mounted dial and sensor,
standard or tamper resistant
models.
Always install these operators in
a horizontal position.
Baseboard/Convectors
Hot water or 2-pipe low pressure
steam n-tube baseboard or
convector. Air circulation does not
pass freely over the operator due to
furniture, drapes, coverings, etc.
=
Combined remote mounted dial
and sensor.
The dial operators are wall
mounted and are available with
6’, 16’ or 26’ long capillary
tubes.
Baseboard/Convectors
The hot water or 2-pipe low
pressure steam n-tube baseboard
or convector arrangement requires
the dial and sensor to be mounted
separately, away from the valve.
=
Separate remote mounted dial
and sensor.
The remote dial mounts on the
wall or enclosure (max. 6’ away).
The sensor is mounted beneath
the radiation or on a draft free
wall 6’away from the dial.
Free Standing Radiators
The free-standing one-pipe low
pressure steam radiator is positioned
where air continually passes freely
over the operator.
=
Valve -mounted dial and sensor,
standard or tamper resistant
models.
Always install these operators in
a horizontal position.
Convectors
The 1-pipe low pressure steam
convector is inaccessible; room air
cannot continually pass freely over
the valve.
=
Combined remote mounted dial
and sensor.
The dial operators are wall
mounted and are available with
6’, 16’ or 26’ long capillary
tubes.
TECHNICAL INFORMATION
MODEL SELECTION: