Product Overview

Data Sheet ESBE CRA112 Setpoint Control
4
VDCPD122 © Danfoss 1/16
Danfoss can accept no responsibility for possible errors in printed materials and reserves the right to alter its products without notice.
All trademarks in this material are property of the respective companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Danfoss
Baltimore, MD
Tel.: [phone] Fax: [phone]
www.na.heating.danfoss.com
Danfoss
Toronto, ON
Tel.: [phone], Fax: [phone]
www.na.heating.danfoss.com
Manual Operation:
When placing the actuator in manual operation, power should be turned o to the actuator. In the
event the actuator is powered and is left in a manual position, the result could lead to the internal
damage to the actuator.
To manually operate the CRA actuator, partially pull out the large indicator knob (1). With it partially
out, rotate the knob to the left or right to manually operate the valve (2). To return the actuator to
automatic operation, rotate the knob to the position prior to manual operation and push the knob
back into the original position.
Dimensions:
(mm)
Additional Info:
*Please See ESBE VRG Data sheet for additional information.
Mounting &
Installation Contd.:
Orientation Mounting Drive Sleeve
The orientation of the drive sleeve determines the version of valve the actuator will mount to.