User Guide
6
Operation Instructions
Combined view (default):
The combined view shows the status of both systems at
the same time. System A is shown on the upper display
line, and System B is shown on the lower display line.
This view gives the user a quick overview of all the sys-
tems.
Flipped view:
The fl ipped view shows the status of one system at a
time. The status of each system is shown for 5 seconds.
This view gives the user more detailed information about
each system.
The user can always press to get more information about the current status
irrespective of view selected.
Menu system
The menu system is navigated by the keys and .
No matter if the GX™ 850 controls one
or two systems, the look and use of the
menu system is always the same. This is
obtained by making the entry to each
system in the main menu. The possibili-
ties and settings for each system are fi rst
accessible after the user has selected the
desired system.
To the right is given an example of the
main menu and the menus for System A
and System B.
Please notice, that only a few of the
menus for each system are shown!
For a complete overview of the menu system, please refer to: Appendix A: “Menu
system”.
A:Roof
B:Ground
A:Roof
>>
Standby
B:Ground
>>
Melting
System
B
System
A
A:Roof˜
ÚStandby
B:Ground¯ˆı
ÚMelting
Selectsystem A:
Roof
Selectsystem B:
Ground
Viewalarm
menu
5s
A:Roof˜
B:Ground¯ˆı
5s
Viewandset
operatingmode
Viewsensor
measurements
Viewandset
operatingmode
Viewsensor
measurements
Only visible when System B is installed!
Appendix
27
View statistic
Viewconnected
sensors
Sensor1041153
Errors0
Sensor204115C
Errors0
View statistics
Operatingtime
3682h
Runningtime
2479h
Relayoperations
14680
BootFWversion
00200303.01
MainFWversion
00330301.01
Textversion
10110301.01
E2PROMversion
01110301.01
Leavethismenu:
PressÛ
Leavethismenu:
PressÛ
Appendix A