User Guide

22
Factory settings (Roof system)
Function Factory settings Range/Options Moisture level 50 5 to 95 (5 being the most sensitive to
moisture)
Melting temperature 35°F (1.5°C) 32°F (0°C) to 50°F (10°C) Post-heat 1 hour 0 to 9 hours Clogged drain On On/off System mode Automatic • Automatic
• Constant ON (manual timer) • Manually OFF
Factory settings (Ground system)
Function Factory settings Range/Options Moisture level 50 5 to 95 (5 being the most sensitive to
moisture)
Standby temperature 27°F (-3.0°C) -4°F (-20°C) to 32°F (0°C) Melting temperature 39°F (4.0°C) 34°F (1°C) to 50°F (10°C) Post-heat 1 hour 0 to 9 hours Clogged drain On On/off System mode Automatic • Automatic
• Constant ON (manual timer) • Manually OFF
Technical Specifi cation Setup Instructions
11
Intial Setup The installation of the GX™ 850 is very easy, and the user is guided through the instal- lation process. The installation process diff ers a little depending on which kind and the number of systems to be installed. Please follow the general description and fi nally select the installation scenario accord- ing to the system type. Change setting with key: Accept setting with key: General Power on GX™ 850 Select language System is being checked… Select system confi guration • Roof system (1 system) • Ground system (1 system) • Combi system (2 systems) • Dual system (2 systems) The rest of the installation is divided into the system confi gurations; roof, ground, combi or dual, as listed above.
Welcome to GX 850 III Select language: English
Checking system
<------>
System size: 1 system
Setup Instructions