Brochure

8
8
Step 9. ENJOY THE COMFORT OF DANFOSS LX
The LX floor heating system is now ready to use. Increase the
floor temperature gradually and adjust it until it reaches a
comfortable level depending on the type of room and your
personal preferences.
9
A final resistance reading must be taken and recorded on the
warranty certificate. Compare the resistance values with values
listed on the cold lead. Also, measure the resistance between the
blue, black and shielding/ground wire. Both should read infinity. It
is important for the homeowner to mail in the certificate
immediately after installing the LX mat and thermostat.
Failure to do so could void the manufacturer's warranty. The
warranty is subject to the guarantee conditions listed on the
warranty certificate.
Label 1: Product identification label
The eight digit product code provided on the LX mat label must be
recorded on the warranty certificate.
Label 2: Electric panel label
This label is to be placed inside the electric panel. On this label
record the name of the room where the heating cable has been
installed.
Label 3: The warning label
The warning label must be placed in the room where the
heating cable has been installed, preferably on the floor.
The label should be kept in the room at least for the
duration of the construction or renovation of the floor.
Step 8. RECORD INFORMATION AND AFFIX
LABELS
Copyright 2009 Danfoss Inc.
TEL: [phone]. FAX: [phone]
088L3380 - 06/09