Product Overview

Danfoss can accept no responsibility for possible errors in catalogs, brochures, other printed materials, and website information. Danfoss reserves the right to alter its
products without notice. This also applies to products already on order provided that such alteration can be made without subsequent changes being necessary in
specications already agreed upon. All trademarks in this material are property of the respective companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Danfoss RX-C
BRINGING WARMTH TO LIFE
Danfoss
Toronto
Toll Free: 1-866-676-8062
Tel.: [phone]
Fax: [phone]
www.LX.Danfoss.com
© Copyright 2016 Danfoss VDLWA222 . 04/16 TEL: [phone], FAX: [phone]
Datasheet RX-C Roof Clips
Technical
Services
For technical questions, please contact Danfoss Heating Division North America at 1-866-676-8062.
More information on Danfoss Electric Heating products is available at www.LX.Danfoss.com.
Warning
• Roof clips must be installed properly to ensure proper operation and to prevent the
risk of electrical hazard or re. Follow all design, installation, assembly, and test instructions
carefully.
• Arcing may not be stopped by conventional circuit protection.
• Do not use clip for installation on slate or tile roofs as damage may occur to roof material.
Consult roong manufacturer for components approved for use on specic roof material.
• De-energize all power circuits before installation or servicing.
• Keep ends of heating devices and kit components dry before and during installation.
• While using pliers to close clamps on heating cable, heating cable should not be crushed or
altered structurally in any way.
• The cable should not be twisted during installation.
• Heating cable should not be embedded in the thermal insulation.