Product Overview

Data sheet

VDKIG422 © Danfoss 07/16

ESBE Series 90 Electronic Motor Actuator

(Combined with ESBE 3&4-Way Rotary Valves)

The actuator should be mounted with the valve stem in either a horizontal position or pointing

upwards. The actuator should not be installed in a downward orientation.

1) Threaded stud

2) Drive sleeve

3) Locking screw

4) Handle

5, 6, 8, 9) Mounting

hardware

7) Mounting base

When installing the handle (4), it should be installed opposite to the indicator on the drive sleeve and

the end of the handle should be facing away from the valve. Failure to properly install the handle will

result in damage to the 90 series motor actuator due to the interference of the mounting stud (1)

with the rotation of the handle

Blue

Black

Brown

Aux. Switch

92P Motor

Single Wire Signal

Controller

92P Motor

2-Wire Signal

Electrical Wiring:

Installation:

Incorrect handle

orientation

Correct handle

orientation

91EM, 92EM,

92-2EM & 93EM Moto