Product Overview

VDBJB122 © Danfoss 05/09
Data sheet VMT
2-Way Water Valve
3
Installation:
Construction:
Typical Installations:
Hot water storage tank
Floor heating system
Radiant system with electronic actuator
Heat exchanger control
The valve body must be installed in the direction
of the flow as noted by the cast-in arrow located
on the body of the valve. Failure to install the
valve in the proper flow direction may result in
system noise.
5
1
6
2
7
3
4
1 Pressure pin Stainless steel
2 Packing gland
3 O-ring EPDM rubber
4 Valve body Brass
5 Valve cone NBR rubber
6 Union nut Brass
7 Tailpiece Brass