Product Overview

ManualsBrandsDanfoss ManualsHeating SuppliesESBE Type F, 3-Way Mixing Valve

Data sheet ESBE Type F

3 & 4-Way Rotary Valves

VDKIN322 © Danfoss 02/18

Ordering

Information:

The ESBE 3 and 4-Way rotary valves type F are

designed for mixing or diverting applications

on heating and cooling systems. The valves are

capable of controlling and distributing water or

non-corrosive liquids on closed looped systems

to dierent zones by either manual operation or

automatically via electronic motor actuator and

controller.

Features:

• The F series of valves are a rotary

design allowing for exibility in eld

piping layout.

Applications:

• Double mixing function for 4-Way valve,

reducing the risk of condensation within

heat source

• Valve position face plate is printed on

both sides and can be rotated allowing a

choice of valve mounting positions

• Easily adaptable with ESBE electronic motor

actuator Series 90

• Suitable uid of 100% water or glycol

mixture (maximum 50% glycol) for heating

or cooling closed loop systems.

3-Way Valve

Code No. Reference Connection Cv*

065B8960 3 F 65-50 2-1/2” ANSI Flanged 75

065B8961 3 F 65 2-1/2” ANSI Flanged 105

065B8962 3 F 80 3” ANSI Flanged 175

065B8963 3 F 100 4” ANSI Flanged 265

065B8964 3 F 125 5” ANSI Flanged 325

065B8965 3 F 150 6” ANSI Flanged 465

4-Way Valve

Code No. Reference Connection Cv*

065B6150 4 F 50 2” DIN Flanged 75

065B6165 4 F 65 2-1/2” DIN Flanged 105

065B6180 4 F 80 3” DIN Flanged 175

065B6200 4 F 100 4” DIN Flanged 265

065B6225 4 F 125 5” DIN Flanged 325

065B6250 4 F 150 6” DIN Flanged 465

*Cv = Flow rate allowed by the valve in GPM with a pressure drop of one psi.

Note:

ESBE 3-way valves are at

faced ANSI anges, 4-Way

valve are DIN raised anges

and require mating DIN weld

raised anges and gaskets.

See page 2 for ordering

information.

3-way Valve 4-way Valve

Summary of content (6 pages)

PAGE 1
Data sheet ESBE Type F 3 & 4-Way Rotary Valves Applications: 3-way Valve 4-way Valve The ESBE 3 and 4-Way rotary valves type F are designed for mixing or diverting applications on heating and cooling systems. The valves are capable of controlling and distributing water or non-corrosive liquids on closed looped systems to different zones by either manual operation or automatically via electronic motor actuator and controller.
PAGE 2
Data sheet Ordering Information (Cont.): ESBE Type F 3 & 4-Way Rotary Valves DIN Flanges and Gaskets Code No. Size 065F8950 2” 082F8961 2-1/2” 082F8962 3” 082F8963 4” 082F8964 5” 082F8965 6” 065F8951 2” 082F8966 2-1/2” 082F8967 3” 082F8968 4” 082F8969 5” 082F8970 6” Description DIN Weld Mating Raised Flange (Four Flanges Required per 4-Way Valve) Gasket for DIN Flange (Four Flanges Required per 4-Way Valve) Replacement Parts Code No.
PAGE 3
Data sheet Technical Specifications: ESBE Type F 3 & 4-Way Rotary Valves Max. operating pressure 90 psi (6 bar) Max. operating temperature 230°F (110°C) Min. operating temperature 14°F (-10°C) Max. differential pressure 1-1/2” – 2”: 8 psi (50kPa) 2-1/2” – 6”: 5 psi (30kPa) Required motor torque (Recommendation for typical application) Valve size max. 2” – 45 in lb (5Nm) Valve size max. 4” – 85 in lb (10Nm) Valve size max.
PAGE 4
Data sheet Typical Installation ESBE Type F 3 & 4-Way Rotary Valves 3-Way Valves 4-Way Valves VDKIN322 © Danfoss 02/18
PAGE 5
Data sheet ESBE Type F 3 & 4-Way Rotary Valves Dimensions: D Material A E G F B C Valve Body Cast iron Slider Brass CW 614N & Stainless Steel Stem Stainless Steel O-ring EPDM Bushing Plastic / Brass CW 602N Cover Plate Zinc / Cast Iron Type F 3-Way, in (mm) Size Reference A B C D E F G Weight lb (kg) 3.9 (100) 7.9 (200) 2.0 (52) 3.7 (95) 5.5 (139.7) 7.1 (180) 4 x ¾” 30.4 (13.8) 2-½” 3 F65 2-½” 3 F65-50 3.9 (100) 7.9 (200) 2.0 (52) 3.7 (95) 5.5 (139.7) 7.
PAGE 6
Data sheet ESBE Type F 3 & 4-Way Rotary Valves Technical Specifications: The 3 or 4-Way rotary valve shall be made of a cast iron material with flanged connections. The valve should be capable of being utilized in heating or cooling closed loop applications. The valve position shall have a face plate with printing on both sides to provide a choice of valve mounting positions. The valve should be capable of assembly with an ESBE series 60 or 90 electric motor actuator.