Brochure
ESBE VTA Series Lead Free Thermostatic Mixing Valves Datasheet
6 | © Danfoss | 03/2020
AI189286403251
Description
Dimensions, in (mm)
Weight
lbs (kg)
A B C D
union valve w/ ½” solder tailpcs 4.1” (104) 2.3” (59) 2.1” (53) 2.0” (52) 1.7 (0.8)
union valve w/ ¾” solder tailpcs 4.8” (122) 2.7” (69) 2.1” (53) 2.4” (61) 1.7 (0.8)
union valve w/ ¾” CPVC 4.7 ” (119) 2.6” (66) 2.1” (53) 2.4” (83) 1.5 (0.7)
¾” valve female NPT connections 2.8” (71) 1.7” (43) 2.1” (53) 1.4” (36) 1.1 (0.5)
1” valve female NPT connections 3.75” (95) 2.5” (63) 2.4” (61) 1.9” (48) 2 (0.95)
A
B
C
Threaded (FPT)
A
B
C
Union Solder & Union CPVC
Dimensions & Weights:
A Thermostatic Mixing Valve shall be installed on
the outlet of the water heater for the distribution
of tempered water to the fixtures. The
thermostatic mixing valve shall have an internal
self regulating element housed within a brass
lead free constructed valve body. The valve shall
have a protective plastic body cover and snap-on
cap to prevent unauthorized tampering. The
valve shall be an ESBE VTA thermostatic mixing
valve series.
A Thermostatic Mixing Valve for hydronic
heating applications shall be installed prior
to the circulator for the system or zone. The
thermostatic mixing valve shall have an internal
self regulating element housed within a brass
lead free constructed valve body. The valve shall
have a protective plastic body cover and snap-on
cap to prevent unauthorized tampering. The
valve shall be an ESBE VTA series thermostatic
mixing valve series.
Typical Specification:
D