Product Overview

Data sheet
Danfoss can accept no responsibility for possible errors in printed materials and reserves the right to alter its products without notice.
All trademarks in this material are property of the respective companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Danfoss Inc.
7941 Corporate Drive
Baltimore, MD 21236 USA
Tel.: [phone], Fax: [phone]
www.na.heating.danfoss.com
Danfoss Inc.
6711 Mississauga Road, Suite 410
Mississauga, ON, L5N 2W3
Tel.: [phone], Fax: [phone]
www.na.heating.danfoss.com
VDKIE122 © Danfoss 05/08
ESBE Series 30 MR
Thermostatic Mixing Valves
Spare Parts:
1- Cap
2- Adjustment Bonnet
3- Thermostat
4- Shuttle
5- Spring
6- Body
Item No. Description
Temperature
Range
Code Number
1-5
Repair Kit
1/2” and 3/4”
Valves
70° - 110°F 065B8842
85° - 120°F 065B8843
95° - 140°F 065B8844
Item No. Description Code Number
1 Cap 065B8846
A Thermostatic Mixing Valve shall be installed
on the outlet of the domestic hot water heater
for the distribution of tempered water to the
domestic fixtures. Valve shall be ASSE 1017
listed. The thermostatic mixing valve shall have
an internal self regulating element housed
within dezincified brass. The valve shall have
a protective plastic body and snap-on cap to
prevent unauthorized tampering. The valve shall
be an ESBE 30 MR thermostatic mixing valve.
A Thermostatic Mixing Valve for hydronic
heating application shall be installed prior
to the circulator for the system or zone.
The thermostatic mixing valve shall have
an internal self regulating element housed
within dezincified brass. The valve shall have
a protective plastic body and snap-on cap to
prevent unauthorized tampering. The valve shall
be an ESBE 30 MR thermostatic mixing valve.
Typical specification: