Submittal Sheet

Danfoss

60-413.12

[]

IC.PD.P10.D8.02 | 520B7816 | 5

Installation Installation

MBC thermostats are designed to withstand the

shocks that occur, e.g. in ships, on compressors

and in large machine installations. MBC

thermostats with remote sensor are tted with 5

mm screws to bulkheads or similar. See g. 2

MBC thermostats with rigid sensor are

self-supporting from the sensor pocket.

For permissible media pressure see g. 3.

Sensor position

As far as possible the sensor should be positioned

so that its longitudinal axis is at right angles to

the direction of ow. The active part of the sensor

is ø13 mm x 50 mm long on thermostat with rigid

sensors and 2 m capillary tube.

Fig. 3.

Permissible media pressure on the sensor pocket as a

function of temperature

Resistance to media

Material specications for sensor pockets:

Sensor pocket, brass

The tube is made of CuZn30, CW 505L acc. to

EN 12449, the threa ded portion of CuZn39 Pb3,

CW 614N acc. to EN 12164.

Sensor pocket, stainless steel 18/8

Material designation X5CrNi18-10, 1.4301 acc. to

EN 10088.

Brass

Stainless steel

Fig.2

Fig. 4

Mechanical Dierence

Setting

When the top cover screw at the thermostat is

removed, the range can be set with the setting

screw. The dierential is non-adjustable.