Submittal Sheet

InIn
Out NO
Out NC
Out NO
Out NC
Danfoss 93Z19.11
Input
Normally closed (NC)
Normally open (NO)
Connected to enclosure
of pressure control
-10 – 30 3 80 2 061B820166 1221-1A02000 061B810166 1231-1A02000 – – –
20 – 60 3 130 2 – – 061B810266 1431-1A02000 – – –
20 – 60 3 130 – – – – 75 061B800266 1411-1A00075
50 – 100 4 200 2 061B820366 2221-1A02000 061B810366 2231-1A02000 – – –
50 – 100 4 200 – – – 75 061B800366 2211-1A00075
70 – 120 5 220 2 – – 061B810466 2431-1A02000 – – –
70 - 120 5 220 – – – – – 75 061B800466 2411-1A00075
60 - 150 6 250 2 061B820566 2621-1A02000 061B810566 2631-1A02000 – – –
60 - 150 6 250 – – – – – 75 061B800566 2611-1A00075
Data sheet | Thermostat, MBC 8000 and MBC 8100
2 | 520B7816 | IC.PD.P10.D8.02
*) If higher vibrations are present in the system/installation, temperature controls with capillary tube or
armoured capillary tube are recommended.
Umgebungsbedingungen
Ambient temperature - 40 – 70 °C
Shock resistance:
50 g/6 ms
Acc. to EN 60068-2-27
Free fall acc. to EN 60068-2-32
Vibration resistance Sin 4 g, 5Hz – 200 Hz acc. to EN 60068-2-6. *
)
Enclosure
IP65 to EN 60529
Anodized AlMgSi 1, AW-6082 T6
Driftsbetingelser
Ambient temperature - 40 – 70 °C
Shock resistance:
50 g/6 ms
Acc. to EN 60068-2-27
Free fall acc. to EN 60068-2-32
Vibration resistance Sin 4 g, 5Hz – 200 Hz acc. to EN 60068-2-6. *
)
Enclosure
IP65 to EN 60529
Anodized AlMgSi 1, AW-6082 T6
Environmental conditions
Ambient temperature - 40 – 70 °C
Shock resistance
50 g/6 ms
Acc. to EN 60068-2-27
Free fall acc. to EN 60068-2-32
Vibration resistance Sin 4 g, 5Hz – 200 Hz acc. to EN 60068-2-6. *)
Enclosure
IP65 to EN 60529
Anodized AlMgSi 1, AW-6082 T6
Mechanical characteristics
Electrical connection DIN 43650 plug, Pg 9, Pg 11, Pg 13.5
Technical data
Electrical specications
Contact load (Alternating current)
0.5 A, 250 V, AC15
12 W, 125V, DC 13
Switch SPDT
Standard types
Setting
range
Fixed
di.
Max.
sensor
temp.
Cap.
tube
length
Capillary tube Armoured capillary tube Sensor
pocket
Rigid sensor
[°C] [°C] [°C] [m] Code no.
Type
MBC 8100
Code no.
Type
MBC 8100
[mm] Code no.
Type
MBC 8100
Input
Normally closed (NC)
Normally open (NO)
Connected to enclosure
of pressure control
© Danfoss | DCS (jmn) | 2017.02