Product Overview

© Danfoss | DCS (rm) | 2019.09
InIn
Out NO
Out NC
Out NO
Out NC
Danfoss 93Z19.11
Input
Normally closed (NC)
Normally open (NO)
Connected to enclosure
of pressure control
Data sheet | Heavy duty pressure switch, type MBC 5000 and MBC 5100
IC.PD.P10.4A.02 | 3
How to choose To achieve the best operating conditions for MBC
pressure controls, it is recommended to apply the
following rules of thumb.
Choose:
• The MBC type/types which meet the demands
for the operating pressure
• The MBC version with the lowest possible
setting range
Thread
Flange connection on MBV 5000 Test Valve
• A diaphragm type, if pressure peaks and
pulsations occur in the system (if possible)
• Bellows type, if low differential is needed
• Piston type for high pressure
Mechanical connection
Adjustment
Electrical connection
Not applicable for piston type
One full turn (360°) of MBC setting screw is approx. equal to 7% of the setting range
Mechanical difference
Input
Normally closed (NC)
Normally open (NO)
Connected to enclosure of pressure control