Product Overview

R
1
/
4
(ISO 7-1)
1/5
2
16
12
15
3
7
8
9
10/11
MK
2 51 183
14 in. / 6 mm
14
=12 mm
1/5 2 13 30183
14 in. / 6 mm
14
=12 mm
Data sheet | Pressure switch, KP
DKRCC.PD.CD0.1A.02 | 520H11562 | 6
KP 15
Design / Function
1. Low pressure (LP) setting
spindle
2. Dierential setting spindle, (LP)
3. Main arm
5. High pressure (HP) setting
spindle
7. Main spring
8. Dierential spring
9. Bellows
10. LP connection
11. HP connection
12. Switch
13. Terminals
14. Earth terminal
15. Cable entry
16. Tumbler
18. Locking plate
30. Reset button
The switch in the KP has a snap-action function
and the bellows moves only when the cut-in or
cut-out value is reached.
The bellows becomes connected to the low
or high pressure side of the plant through
connection (10) or (11).
Pressure switch , type KP
Capillary tube for KP 1A, KP 5A and KP 15A
The design of the KP pressure switch gives
the following advantages:
y high contact load
y ultra-short bounce time
y high resistance to pulsation
y vibration resistance up to 4 g
in the range 0 – 1000 Hz
y long mechanical and electrical life
KP 1, KP 2, KP 5
© Danfoss | DCS (rm) | 2019.03