Submittal Sheet

© Danfoss | DCS (rm) | 2019.12 IC.PD.P10.F9.02 | 7
Data sheet | Pressure switch and Thermostat, KP and KPI
Accessories for KP pressure switches
Part Symbol Description Total Code no.
Brackets
with mounting
screws
and washers
Wall bracket for KP 1 060-105566
Angle bracket for KP 1 060-105666
Screwed
cable entry
PG 13.5 with special nut
For 6 –14 mm diameter cables
1 060-105966
Sealing screw For sealing the setting on KP 2 060-105766
Top cover
If a bracket is mounted on the backplate of the housing,
the KP thermostats will have an IP44 grade of enclosure.
The cover protects the setting spindles
1 060 -109766
Protective cap
Protective cap for KP pressure switches and thermostats.
To protect the unit against rain and humidity.
Grade of enclosure: IP44
Material: Polyethylene
Max. ambient temperature: 65 °C
Min. ambient temperature: -40 °C
1 060-003166
IP55
non-
transparent
enclosure
If the unit risk being exposed to heavy water influence
a better grade of enclosure can be achieved when
mounting product in a special IP55 enclosure
1 060-033066
IP55
transparent
enclosure
If the unit risk being exposed to heavy water influence
a better grade of enclosure can be achieved when
mounting product in a special IP55 enclosure
1 060-062866