Submittal Sheet

ManualsBrandsDanfoss ManualsHVAC ControlsKPI36 SPDT Differential Pressue Switch

Data sheet | Pressure switch and Thermostat, KP and KPI

Accessories for KP thermostats

Part Symbol Description Total Code no.

Brackets

with mounting

screws

and washers

Wall bracket for KP 1 060-105566

Angle bracket for KP 1 060-105666

Sensor holder

Sensor holder for wall mounting with four capillary

tube clips and 9-oﬀ 12 mm pins

1 017-420166

Screwed

cable entry

PG 13.5 with special nut

For 6 – 14 mm diameter cables

A standard Pg 16 cable entry can be used for 8 –16

mm diameter cables

1 060-105966

Sealing screw For sealing the setting on KP 2 060-105766

Top cover

If a bracket is mounted on the backplate of the

housing, the KP thermostats will have an IP44 grade

of enclosure. The cover protects the setting spindles

1 060-109766

Protective cap

Protective cap for KP pressure switches and thermostats.

To protect the unit against rain and humidity.

Grade of enclosure: IP44

Material: Polyethylene

Max. ambient temperature: 65 °C

Min. ambient temperature: -40 °C

1 060-003166

Sensor pocket

Brass Stainless steel

Permissible pressure of sensor pipe medium

For all KP thermostats with cylindrical remote sensor.

Sensor pocket, gasket and union for screwing into G½

connectors welded onto tubes, containers, etc.

Int. diameter 9.6 mm, insert depth 112 mm (brass).

Ext. diameter 11 mm

1 017-437066

Int. diameter 9.6 mm, insert depth 112 mm (st 18/8).

Ext. diameter 11 mm

1 017-436966

Int. diameter 9.6 mm, insert depth 465 mm (brass).

Ext. diameter 11 mm

1 017-421666

Media temperature for sensor: 250 °C

This temperature can be increased by applying a diﬀerent gasket material

Heat-

conductive

aluminium

paste

Tube

For KP and RT thermostats

with sensor mounted in a sensor pocket.

Temperature range: -20 – 150 °C (short-lived 220 °C)

Tube with 5 g aluminium paste

1 041E0114