Product Overview

Data sheet | Electric expansion valves, type ETS 6
© Danfoss | DCS (rm) | 2019.08
AI227986437323en-000901 | 4
Single pack
Model
No.
Voltage
(current)
Enclosure
Insulation Cable length
Connector
Units per
box
Single pack
Code No.
class [m] [in.]
ETS 6 Coil
12 V DC
(0.26A/phase)
IP 66
Class “E”
(UL Class 105
(A))
0.7 27.5 JST XHP-6 1 034G5105
0.7 27.5 JST XHP-5 1 034G5115
1.5 59.0 JST XHP 5
1
034G5145
2.0 78.7 JST XHP 5
1
034G5185
3.0 118.0 JST XHP 5
1
034G5135
0.6 23.6 AMP UPC- 6
1
034G5175
I-pack
ETS 6 Coil
12 V DC
(0.26A/phase)
IP 66
Class “E”
(UL Class 105
(A))
0.7 27.5 JST XHP-6 100 034G5100
0.7 27.5 JST XHP-5 100 034G5110
1.5 59.0 JST XHP 5 100 034G5140
2.0 78.7 JST XHP 5 100 034G5180
3.0 118.0 JST XHP 5 40 034G5130
3.0 118.0 JST XHP 6 40 034G5150
0.6 23.6 AMP UPC- 6 100 034G5170
For the Danfoss controller select a ETS 6 coil with JST XHP-5 connector.
↓ OPENING ↓
Coil I Coil II Common
↑ CLOSING ↑
Orange Yellow Red Black Gray
on off off off 0
on off on off 0
off off on off 0
off on on off 0
off on off off 0
off on off on 0
off off off on 0
on off off on 0
Electrical wiring
Stepper motor
switch sequence
The illustration shows the JST XHP-6 connetor. The coil with JST XHP-5 is identical except that it does not have an unused pin.
Controller
Type Description Code no.
ETS 6 manual coil Manual coil for service 034G5199
Accessories
Coil ordering
Type Description Code no.
AST-G service driver Driver for service of the valve 034G0013
JST XHP-5
JST XHP-6
1
2
4
5
6
3
1
2
3
4
6
Danfoss 80G322.10
AMP UPC-6