Submittal Sheet

Table Of Contents

Media

Refrigerants

R1234yf, R1234ze(E), R125, R134a, R152a, R22, R290, R32, R404A, R407C, R407F, R407H, R410A, R413A, R417A, R422A,

R422B, R422D, R438A, R422A, R422B, R422D, R438A, R442A, R444B, R447A, R447B, R448A, R449A, R449B, R450A,

R452A, R452B, R454A, R454B, R454C, R455A, R463A, R507A, R512A, R513A, R513B, R515A, R515B, R516A, R600,

R600a.

For a complete list of approved refrigerants, visit store.danfoss.com and search for individual code numbers, where

refrigerants are listed as part of technical data.



NOTE:

Special note for R1234yf, R1234ze, R152A, R290, R32, R444B, R452B, R454A, R454B, R454C, R455A, R516A, R600 and

R600a: This product is validated in accordance to ATEX, ISO 5149, IEC 60335-2-24, IEC 60335-2-40 and UL. Ignition

risk is evaluated in accordance to ISO 5149 and IEC 60335.

The EVR 2 – EVR 22 with solder connections and without manual stem can be applied on systems with R1234yf,

R1234ze, R152A, R290, R32, R444B, R452B, R454A, R454B, R454C, R455A, R516A, R600 and R600a as the working

uid.

EVR 2-15 are connections are only approved for A1 and A2L refrigerants



NOTE:

Excluded from this EVR 22 with connections 1

⁄8 inch / 35mm related to PED requirements.

The EVR 2-EVR 40 versions with solder and are connection and without manual stem can be applied to oil-free

systems : R1234ze(E)

EVR 2 - EVR 22 versions with solder and are connections and without manual stem can be applied to oil-free

systems R513A, R515B, R516A



NOTE:

EVR 2-22 (R516A) and EVR 2-40, R1234ze:

• Excluded from this EVR 22 - EVR 40 with connections 1

⁄8 inch / 35mm and larger connections related to higher

PED requirements.

For countries where safety standards are not an indispensable part of the safety system Danfoss recommends the

installer gets a third party approval of any system containing ammable refrigerant.



NOTE:

Please follow specic selection criteria stated in the datasheet for these particular refrigerants.

Media temperature

-40 – 105 °C, Max. 130 °C during defrosting

For R1234ze Media temperature: - 20 - 90 °C (105 °C for transient condition).

Solenoid valve, Type EVR 2 - EVR 40