Submittal Sheet

Table Of Contents

The protective cap should be removed and the manual stem (12) Design and material should be rotated until the

valve is fully open. It takes approx. 6 cycles from fully closed, to reach the fully open position.

After manual operation is completed, the valve should manually be closed again and the protective cap mounted.

 NOTE:

Alternatively, all EVR NC and NO valves can be manually operated by removing the coil and force the valve open or

closed by using a solenoid valve tester (permanent magnet) code no. 018F0091.

Solenoid valve, Type EVR 2 - EVR 40