Service Manual

032R9605

Danfoss

32F966.10

Danfoss

32F965.10

DKRCC.PI.BB0.2D.02 | 1

NC solder NC ﬂare NC ﬂange NO solder

Mounting / dismounting of top part

EVR 2 - EVR 8

Type [Nm] [kpm] [ft-lbs] Torx size

EVR 2, EVR 3,

EVR 4, EVR 6, EVR 8

3.0 0.3 2.2 T15

Type [Nm] [kpm] [ft-lbs] Torx size

EVR 10, EVR 15, EVR 18

10 1 7.4 T30

EVR 20, EVR 22 30 3 22.1 T45

Special for EVR 4 - EVR 8:

Dismounting gasket and supporting ring

Note!

Always use

cross-tightening

Mounting of support washer

Note!

Always use

cross-tightening

Mounting / dismounting of top part

EVR 10 - EVR 22

Caution!

For EVR 2 - EVR 3, and EVR 10 - EVR 22, a screwdriver might be needed

for removal of the gasket. Be careful not to scratch the gasket surface.

Oﬀ

Note:

tube design

Disassembly and assembly of 032Lxxxx only

Service guide

Solenoid valve

Types EVR 2 - EVR 22 (version 2)

PAGE 1
Service guide NC solder NC flare NC flange 032R9605 032R9605 Solenoid valve Types EVR 2 - EVR 22 (version 2) NO solder Note: tube design Disassembly and assembly of 032Lxxxx only Mounting / dismounting of top part EVR 10 - EVR 22 4 1 Danfoss 32F965.10 1 4 Danfoss 32F966.10 Mounting / dismounting of top part EVR 2 - EVR 8 2 3 2 Note! Always use cross-tightening 3 Note! Always use cross-tightening Type EVR 2, EVR 3, EVR 4, EVR 6, EVR 8 [Nm] [kpm] [ft-lbs] Torx size 3.0 0.3 2.
PAGE 2
EVR 2 – EVR 3 (NC) EVR 4 – EVR 8 (NC) EVR 10 – EVR 22 (NC) EVR 4 – EVR 8 (NO) EVR 10 – EVR 20 (NO) 1 1 1 1 1 2 2 2 2 2 Pos. no. Description 1 O-ring 2 © Danfoss | DCS (az) | 2018.01 Gasket Dimension Material ID 14.30 x H 2.40 Chloroprene EVR 2 - EVR 3 OD 22.2 x ID 18.0 x H 2.5 Chloroprene EVR 4 - EVR 8 OD 26.1 x ID 21.1 x H 2.5 Chloroprene EVR 10 OD 40.7 x ID 35.5 x H 2.6 Chloroprene EVR 15 - EVR 18 OD 48.7 x ID 43.5 x H 2.6 Chloroprene EVR 20 - EVR 22 OD 64.2 x ID 59.