Data Sheet

AI340540233861en-020105 | 1

Data Sheet

Danfoss Ally™ Gateway

The Danfoss Ally™ Gateway is a programmable,

wireless control system that connects all the

Danfoss Ally™ devices to the internet and intelli-

gently controls your heating via a free app down-

loadable from Google Play and App Store.

The power supply and LAN cable for the internet

connection are included.

• Controls the daily heating schedule for every room

allowing quick and easy adjustments to be made.

• The Pre-Heat function is used to ensure you have

the right temperature when you want it. When Pre-

Heat function is “On” it means that, it is ramping up

to the next scheduled At Home mode.

• The Danfoss Ally™ Gateway software is automati-

cally updated from the internet.

The number of each type of unit for the one system

must not exceed:

Danfoss Ally™ Gateway 1 unit

Danfoss Ally™ Radiator Thermostat 32 units

Danfoss Icon™ Master Controller 3 units

Danfoss Zigbee Repeater >10 unit s

Application

Ordering

Product Installation Guide - Languages Code no.

Danfoss Ally™ Gateway EN, DE, DA, FR, IT, PL, CS 014G2400

Easy Installation

PAGE 1
Data Sheet Danfoss Ally™ Gateway Application The power supply and LAN cable for the internet connection are included. • Controls the daily heating schedule for every room allowing quick and easy adjustments to be made. • The Pre-Heat function is used to ensure you have the right temperature when you want it. When PreHeat function is “On” it means that, it is ramping up to the next scheduled At Home mode. • The Danfoss Ally™ Gateway software is automatically updated from the internet.
PAGE 2
Danfoss Ally™ Gateway Data Sheet Technical Specifications Danfoss Ally™ Gateway Device Function Smart Home Gateway Recommended Use Residential indoor (pollution degree 2) Application Radiators, water-based floor heating LED Indicators (green) Power/Status, Network Connection Button Press Reset Button for 5 sec.