Brochure

3
VD.52.B4.02 © Danfoss 09/2015
DEN-SMT/SI
Hot water cylinder Heat exchanger in radiator heating system
RAVK
Combination of VMV and RAVK
Data sheet Thermostatic actuator RAVK
Technical data
Type RAVK
k
v
(m
3
/h)
at a P-band °C of
Max. pressure
Test
pressure
(bar)
Max. ow
temp.
(°C)
Max. sensor
temp.
(°C)
PN Δp
2 4 6 8 10 (bar) (bar)
RAV/VMT 10/8 0,35 0,65 0,85 1,0 1,1
10 0,8 16 120
120
RAV/VMT 15/8 0,5 0,75 0,95 1,1 1,2
RAV/VMT 20/8 0,55 1,1 1,6 2 2,2
RAV/VMT 25/8 0,6 1,2 1,8 2,2 2,3
VMA 15 (k
vs
=0,25) 0,1 0,2 0,2 0,2 0,2
16
3,0
25 130
VMA 15 (k
vs
=0,4) 0,1 0,3 0,3 0,3 0,3 3,0
VMA 15 (k
vs
=0,63) 0,2 0,5 0,6 0,6 0,6 1,5
VMA 15 (k
vs
=1,0) 0,2 0,5 0,7 0,7 0,7 1,5
VMA 15 (k
vs
=1,6) 0,2 0,6 0,8 0,8 0,8 1,5
VMA 15 (k
vs
=2,5) 0,4 0,9 1,3 1,3 1,3 0,5
VMV 15 (k
vs
=2,5) 0,45 0,9 1,3 1,75 2,2
16 0,2 25 120
VMV 20 (k
vs
=4,0) 0,7 1,4 2,1 2,8 3,6
KOVM 15 (k
vs
=0,63) 0,3 0,4 0,5 0,6 0,6
10 0,8 16 90KOVM 15 (k
vs
=1,5) 0,7 0,9 1,2 1,3 1,5
KOVM 15 (k
vs
=2,0) 0,9 1,3 1,6 1,8 2,0
Materials RAV/VMT VMA VMV KOVM
Valve body Brass DZR Rg 5 Brass
Valve cone NBR rubber EPDM EPDM EPDM
Spindle - DZR St. steel St. steel 18/8
Temp. sensor Cu
Immersion pocket Brass or stainless steel
Capillary tube Cu
Application principles
Installation positions Temperature controller
The valve body could be installed in the ow
or return pipeline with ow in the direction
indicated by the cast-in arrow.
Temperature sensor
The sensor could be installed in any position.