User manual

Installation Guide
Easy Installation
Scan for video guide
1 2
Connect the H-piece to the copper
inserts and tighten the union nuts.
3
4
Firstly, remove the two brass inserts
from the valve body.
Fit the valve body to the ow and
return pipework.
Screw both of the removed brass
inserts into the radiator and tighten
with a 10 mm Allen key.
Once installed take o the lock shield
cover. Ensure the RLV is open using
a 8mm Allen key, then put the cover
back on.
Fitting the H-piece valve:
Radiator with bottom connection
A