User manual

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations
can be made without subsequential changes being necessary in specications already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights
reserved.
Danfoss A/S
Haarupvaenget 11
DK-8600 Silkeborg
Denmark
homeretail.danfoss.com
Installation Guide
1 2
Whilst holding the sensor rmly on
the valve secure connection by turn-
ing the union nut clock-wise by hand.
Whilst still holding the sensor rmly
on the valve fully tighten the metal
union.
3 4
Remove cap from valve and turn
sensor to 5.
Make sure union nut is turned loosely
up towards the sensor body until it is
only slightly free of the lower part of
the sensor body.
Press the sensor rmly onto the valve.
Sensor horizontal: ensuring that the
scale pointer is at top.
Sensor vertical: ensuring that the
scale pointer is at the front.
Set desired room temperature.
Removing the Sensor:
Turn the sensor to max. position 5.
Turn union nut anti-clockwise to
release locking mechanism.
Easy Installation
Scan for video guide
Danfoss Heating Segment VI JPH102 06/2015
Radiator
Sensor (TRV)
Fits on: Product Code
RTW- RA Danfoss 013G6500
RTW-K Honeywell, Heimeier, Oventrop 013G6501
HOME thermostat: