0-in-1 Record Player Turntable TE-103 Model Turntable with USB, FM & Bluetooth Reception User’s Guide 1
Instructions Before Start Read the manual before using this product. Keep these instructions for future reference. About Records 1. 2. 3. 4. 5. 6. Never use a record with cracks or warps. Never use a record that is cracked or warped, as this may cause extreme wear and destruction of the needle. Never use unusual play methods such as scratching. This unit is not designed for such playback. Do not expose the unit to direct sunlight, high temperature or high humidity. This may cause warping or deformation.
PARTS ILLUSTRATION: 1. Turntable Platter 2. Turntable spindle 3. 45 RPM adapter 4. Tone arm lift lever 5. Speed selection switch 6. Auto stop ON/OFF switch 7. Tone arm 8. Cartridge 1. 2. 3. 4. 5. 6. 7. 8. 9. Repeat button 10. SD/TF card slot 11. USB flash drive port 12. Aux-in port 13. Previous track 14. Pause/Play button 15. Next track 16.
BUTTONS USE ILLUSTRATION: ------------------------POWER ON/OFF Button ----------Long press to power on and off the unit. ------------------------Mode Switch Button ------------- Switch mode between "PHONO-BT-USB-AUX IN-FM-PHONO" -----------------------FM Frequency Tuner ------------- Tune the FM radio frequency between 87.
PHONO Mode---Playing a Record It is recommended that you use extreme care when manipulating the tone arm, stylus, and other components of this turntable. These parts are very sensitive and can easily break or become damaged if they are carelessly handled. Lock Unlock 1. Use the original power adapter(5V/1A) and power cord connect with the DC-IN port on the back of the turntable. 2. Press the button till the LED display shows"PHO" and beep, if not, check the power and adapter. 3.
Bluetooth Input--- pairing with Bluetooth 1. Short press “MODE” button on the control panel to switch mode till "BT" shows on the display panel. Bluetooth is ready for connections. 2. Turn on the Bluetooth function on your device, search for and select "BLTD"in your Bluetooth settings to pair, you will hear a beep if your device is successfully connected. Note: If your device requests a password, enter the default password "0 0 0 0 " and press OK. 3.
NOTE: Make sure that the USB stick / SD card you use has enough space. For recording, press "Record" button at the start and end of each recording. This unit does not have a function to automatically separate songs, the recording from the start to the end is recorded as one file. (Please note that it will not be individual data for each song) Never remove the USB stick / SD card while recording. If you remove it, the recorded data may be damaged.
RCA Line-out 1. Connect RCA audio cables(white to white, red to red) to the RCA Audio Output on the back of the turntable, and the other side to the audio input of an external stereo system. 2. Adjust the external stereo system to accept audio input from the turntable. 3. Turn the volume of the turntable to the minimum and the volume of the external speakers to a proper degree. 5 RCA cable not included RCA Audio Output to external system &2 .
AUX IN Connecting to Audio Source AUX-in Mode Requires 3.5 mm audio input cable (not included). Note: When the Source selector is set to Aux In, When a 3.5mm audio cable is plugged into the unit, it will automatically detect the input and power ON in Aux In mode. 1. Plug a 3.5 mm audio input cable into the Aux In on the unit and the audio output/headphone output on an MP3 Player or other audio source. 2. Use the controls on your connected music player to select and play audio. 3.
Troubleshooting: CONTACT ----support25@163.com There is no power? • • • • Power adaptor is not connected correctly. No power at the power outlet. Use the wrong adapter instead of he original one included. Power button is not turned on, turn the volume/ON/OFF button clockwise to turn on. My record is skipping or turntable keeps wobbling? • There are built-in springs inside the turntable to reduce absorption to protect the turntable, so it's normal to little up and down slightly.
