User Manual

32
1. Insert instrument cable into IN jack.
2. Use 9V battery (Danelectro® Vintage Battery) or
Danelectro DA-1 AC Adaptor. Power adaptor must be
center negative, 9 Volts, 300mA maximum.
3. Turn on the amplifier using the OFF/VOLUME control.
Set VOLUME to desired setting.
4. Adjust TONE control for desired bass/treble setting.
5. Adjust O. DRIVE control for desired distortion.
6. To use HEADPHONE, connect plug from Walkman®
type headphones to the HEADPHONE jack.
7. When sound quality or volume level is degraded, replace the
battery.
Caution: Loud volume levels through speaker or headphone can cause
hearing damage. Please use appropriate volume levels.
INSTRUCTIONS
™