FAB Metal EEC Agent: John Hornby Skewes & Co., Ltd.
D-3 Instructions FAB GAIN: TONE: LEVEL: Adjusts the amount of distortion Adjusts the EQ Adjusts the output level Metal TO BEGIN: • Connect instrument cable to the IN jack. Connect amplifier cable to the OUT Jack. If using an AC Adapter, connect to DC-9V jack. Or use 9Volt battery (included). • LED light will be on when foot switch is activated. INPUT 9V DC OUTPUT CONTROL FUNCTIONS: LEVEL: This control sets the level of the output to the amplifier. TONE: Rotate this control to adjust the EQ.
