Operation Manual

On/Off
Media Streamer
SD CARD READER INTERNET BRIDGE
CHARGE IN
USB DATA
CHARGE OUT
USB DRIVE
RESET
Power
Internet Bridge Indicator
Card Reader Indicator
Battery Indicators
(see chart below)
Reset SDHC Slot
USB Slot
USB Charge Out
Charge In
PC Data
Definition of LED Battery Indicators
3 green LED: 80%-100% battery
2 green LED: 40%-80% battery
1 green LED: <40% battery
0 green LED: 0% battery if not
connected to power; 100% battery
if connected to power
To check the battery life of the Media Streamer, press
on/off button for 1 second and read LED as stated above.
Blue LED on when internet bridge
is enabled
Orange LED on when SD card is
detected. Orange LED flashing
when SD data in transmission
Definition of LED
Features
QUICK START BASICS
1
Power On: Press on/off button for 5 seconds and
blue LED square lights up, then green LED lights on.
2
Power Off: Press on/off button for 5 seconds and all LED
lights switch off.
3
Charge In / Charge Media Streamer: Plug microUSB cable
to Media Streamer; plug the USB end to a USB wall charger
or a working computer. It is suggested to fully charge the
battery before first use.
4
Charge Out / Charge Mobile Devices Using Media
Streamer: Connect mobile devices to the USB port on
Media Streamer. Press on/off button for 1 second to
charge out.
5
Apps: Search key word “MediaStreamer” in Apple App
Store or Google Play.