Operating Instruction

II. Aviation Plugs Sequence
1. Power interface:
No.
1
2
3
4
5
Function
GND
VCC
N
N
N
2. Network cable interface:
No.
1
2
3
4
5
6
7
8
Function
TX +
orange,
white
TX -
orange
RX +
green,
white
Blue
Blue,
white
RX –
green
Brown,
white
Brown
III. Parameters of DF-CPE201 CPE
⚫ 12~24V DC power supply
⚫ Speed limits: 515m/s
⚫ Operating temperature: -30℃~70℃
⚫ Dust-proof, shock-proof, low heat dissipation, 7/24 operation.
⚫ Seismic factor: 5~300HZ, 5G accelerated impact
IV. Equipment Management Configuration
4.1 Enter equipment IP at browser to log in ‘Configuration’
⚫ Connect PC with MWS100-HSX5600-MC1G through web port. Add a
network segment same as MWS100-HSX5600-MC1G on the PC (Use local
connection when connected locally, use wireless connection when
connected wirelessly). The factory default IP address of
MWS100-HSX5600-MC1G is 192.168.1.1
⚫ Enter IP address ‘192.168.1.1’ at IE browser (Firefox is more recommended),
user name is ‘Admin’, password is ‘Admin’.
Notice: ‘Update’ button in the bottom right corner must be clicked after
changing any parameter at ‘Configuration’ to make it effective. Some of the
configuration parameters require MWS100-HSX5600-MC1G to reboot, the
whole process may take a few seconds.
4.2 Home page status/ Restore factory settings/ Firmware upgrades/ Reboot
System Details
Display equipment model, firmware version and kernel version, etc.
Wi-Fi Details
Display equipment working channel, SSID, transmitting power, etc.
Factory Defaults
Click to restore factory settings.
Load Firmware
Click it to upgrade equipment firmware. View and select the target firmware and