Installation Guide

Add-A-Shower Parts
Assembled Frame Section Dimension 24" x 42"
Bend Upper Riser Tube 25-1/2" (B)
Showerhead 1.8GPM Max/ 1-7/8" (J)
Flange for Support Tube - 2 (I)Flange for Support - 1 (I)
Plastic Anchors & Wood Screws - 6 each
Screws - 10
Ceiling Tube Connector (F) Shower Tube Connector (C)
Pipe Thread Tape - 1 Support Loop (F)
Coupling (E)
Lower Wall Support Rod 6" (G)
Frame Section without Tapered End - 2 (L)
Frame Section with 3-1/4" Tapered End - 2 (M)
Ceiling Support Tube 30" - (N)
Lower Riser Tube 36" (D)
Upper Wall Support Tube 10" (H)
Spout Riser Connector Nut (K)
Diverter Tub Spout Faucet 3-3/8"
Centers with Thread Shanks (A)