Installation Guide

Instructions for Delta
®
Universal Trim Kit con’t
Installation of Handle Adapter & Handle
Handle Adapter for Valve Types A or Type B
Figure 8
1. Locate handle adapters (N/O) for Valve Type A & B.
Determine which adapter to use based on which will fit on the valve stem.
2. Partially thread set screw (P) in to handle adapter (N/O) that fits on the valve stem (Fig. 8).
3. Slide Handle Adapter on to valve stem, making sure that the valve stem is fully seated in the adapter.
Align the handle adapter to where the set screw (P) is pointing down.
Secure the set screw (P) to the valve stem.
Handle Adapter for Valve Type C
Figure 9
1. Locate the handle adapter (Q) for Valve Type C.
2. Slide the handle adapter (Q) for Valve Type C on the valve stem, making sure that the adapter
is oriented in the downward position as shown. Do NOT secure handle adapter (Q) to valve stem.
Choose Desired Handle
(clear plastic or metal lever handle)
For Clear Plastic Handle
(Valve Types A, B and C) Fig. 10
1. Place clear plastic handle (R) over handle adapter.
For Valve Type A or B, use screw (S) and lock
washer (T) to secure handle (R) to handle adapter.
For Valve Type C, screw (S) will screw directly in
to stem.
2. Snap handle button (U) to handle (R).
For Metal Lever Handle
(Valve Types A and B) Fig. 11
1. Place metal lever handle (V) over handle adapter (N/O). Lever should point downward. Using hex screw (W),
pass through handle (V) and screw in to handle adapter (N/O) from the under side of the handle. Secure in place.
(Valve Type C) Fig. 11
1. Using screw (S) and lock washer (T), secure handle adapter (Q) to valve stem.
2. Place metal lever handle (V) over handle adapter (Q). Lever should point downward. Using hex screw (W),
pass through handle (V) and screw in to handle adapter (Q) from the under side of the handle. Secure in place.
N/O
P
N
O
R
R
S
T
T
U
S
U
FIGURE 8
Handle Adapter
for Valve Type A
Handle Adapter
for Valve Type B
Q
Q
FIGURE 9
Handle Adapter
for Valve Type C
FIGURE 10
FIGURE 11
Valve Type A/B
Valve Type C
Valve Type A/B
Valve Type C
P
O
Q
Q
N
R
T
S
U
U
R
T
S
Q
V
W
V
W
T
S
N/O
N/O
DELTA-2
Instructions for DELTA Trim Kits #10003/#10004/##10562
© 2012 Danco, Inc. • Irving, TX 75062
Made in China/Hecho en China