Setup Guide

4) Connect your phone to the Danby Parcel Guard Hotspot
In order to setup your Danby Parcel guard to your network, we first need to communicate with the
device directly. To do this, we need to connect to the device’s active hotspot.
The best way to complete this is go to your phone settings, and go to your network settings. You
should see a wireless network that starts with “DNBC_”
5) Join the Danby Parcel Guard to your network
Once you are connected to your Danby Parcel Guard, return to the application setup screen. You
should see the following screen with your serial number of your unit.