Technical data

ManualsBrandsDanby ManualsBeverage DispenserDKC445BL

Model.Modele.Modelo

DKC445BL

For service, contact your nearest

service depot or call:

1-800-26- Oanl_'

(1-800-263-2629)

to recommend a depot in

your area.

En cas de reparation, veuillez

contacter votre service

apres-vente le plus pres ou

communiquez au:

1-800-26- II)alrlll_"

(1-8oo-263-2629)

pour connaftre le service

apres-vente Ie plus proche.

Para obtener servicio,

comuniquese con el

establecimiento de servicio

mas cercano o Ilame al:

1-800-26- Danby

(1-800-263-2629)

para que le recomendemos un

estabtecimiento de su zona..

(hill'nJ p Keg Cooler

The model number can be found on the serial plate located on the

back panel of the unit.

All repair parts available for purchase or special order when you

visit your nearest service depot. To request service and/or the

location of the service depot nearest you, call the TOLL FREE

NUMBER.

When requesting service or ordering parts, always provide the

following information:

• Product Type

• Model Number

• Part Description

Glaciere de biere en fOt (hill'nJ p

Le numero du modele se trouve sur la plaqued'identificationsituee

sur le panneau arriere de I'appareil.

II est possible d'acheter les pieces de rechange ou de les obtenir par

commande speciale en vous rendant a votre service apres-vente le

plus proche. Pour effectuerdes reparationsou obtenir I'adresse du

service apres-vente le plus proche, veuillez composer le NUMC:RO

SANS FRAIS.

Pour effectuer des reparationsou commander des pieces de

rechange,veuillez donner les renseignementssuivants •

• Typede modele

• Numero du modele

• Description des pieces

Barrilrefrigerador (hili'n

El nt3merode modelo se encuentraen la placa de serie, ubicada en

el tablero posterior de la unidad.

Puede comprartodos los repuestos o hacer un pedido especial

visitando el establecimientode servicio mas cercano a su domicilio.

Llame al TELEFONO GRATUITO para obtener servicio de

mantenimientoo la direcci6n del establecimiento de servicio mas

cercanoa su domicilio.

Siempre, a] solicitar servicio de mantenimientoo hacer un pedido de

repuestos,debe suministrar la siguiente informaci6n:

• Tipo de artefacto

• NQmerode modelo

• Descripci6n del repuesto

DanbyProductsLimited, Guelph,Ontario Canada N1H6Z9

DanbyProductsInc., Findlay,OhioUSA 45840

Printed in China (P.R.C)

Summary of content (15 pages)

PAGE 1
(hill'nJ p Keg Cooler The model number can be found back panel of the unit. Model. Modele.Modelo DKC445BL service depot or call: 1-800-26- Oanl_' (1-800-263-2629) plate located on the All repair parts available for purchase or special order when you visit your nearest service depot. To request service and/or the location of the service depot nearest service or information: ordering following • Product • Model Number you, call the TOLL FREE NUMBER.
PAGE 2
OWNER'SMANUAL MANUEL D'UTILISATION MANUALDEL PROPIETARIO Model, Modele,Modelo DKC445BL CAUTION: Readandfollowallsafetyrules andoperatinginstructions beforefirst useof thisproduct, Keg Cooler PRECAUTION: Veuillezlireattentivementles consignesdesecuriteet les instructions d'utilisation avant I'utilisationinitialede ce produit.
PAGE 3
Before putting appliance into use .................................................. We care for the environment ..................................................... Tips for energy savings ......................................................... Disposal of worn out appliance ................................................... Location ..................................................................... Instructions for setting up the Chill 'n Tap Keg Cooler ..................................
PAGE 4
• Beforeconnecting theappliance toanyelectricalpowersupply,leaveit standing(upright)forabout2 hours.Thiswillreducethepossibility of malfunctions inthecoolingsystemduetotransporthandling. • Cleantheappliance thoroughly, bothinteriorandexterior.(SeeCleaning andMaintenance) • Ourproductsuseenvironmentally friendly(recyclable) materials. Tothisend,individual packaging materials areclearlyidentified witha recycling symbol.Alwaysuseproperdisposalmethods.
PAGE 5
Instructions pertaining to the risk of fire, electric shock, or injury to persons. GROUNDING INSTRUCTIONS For your personal safety, this appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a power cord having an equipment grounding conductor and grounding plug.
PAGE 6
1 ChromeRail(forattachment to Worktop) 4 Self-Tapping Screws(toattachchromerail) 1 CO2Cylinder SupportStand 1 CO2Cylinder (empty) 1 CO2Regulator (high/low pressure gauges) 1 CO2Air LineHose(red) 2 CO2Air LineHoseConnectors (black) 1 BeerKegCoupler 1 BeerTowerUnit(complete withfaucet,hoseandwingnut) 1 RubberWasher(tobeinstalledinsidewingnut) 1 BeerTower(QuickConnect)Bayonet Attachment (beertowerinstallation) 4 Machine Screws(toattachbayonettobeertower) 1 Gasket(beertowerbase) 1 PullHandle(beertowerfaucet) 1
PAGE 7
N: II ItIki_Hiir_,!-.,l_,T.-._-,,] _i_vA1:1 L"dlI__-,,]i I :,11[_ I [el__ 1. Remove Worktop: Using a Phillips Screwdriver, remove the three screws located on the front underside edge of the worktop and the three screws located at the rear (back) side of the worktop. See Fig's. 1 & 2 Remove the worktop from the cabinet and position the worktop on top of the cabinet so that the front corners are staggered across the front corners of the cabinet. Fig. 1 2.
PAGE 8
e.]:II It Iki_mF_,I"./_,T_',_ _I;AI:] L'dl I_[_'._i I :,laIN I [0] __I_o] _M . . installation of CO2 Air Line inside Cabinet: Remove rubber plug located at the exterior (top right hand corner) of the cabinet. (store this plug in a safe place, it will be required when converting your unit back to a basic refrigerator) Insert the open end of the air line into the cabinet through the opening vacated by plug. See Fig.
PAGE 9
d -"II I Ijl _Ii F;I".iV;_.!.I;l_VJl :] li'| I__.']11 :_1[_1i [e] __.I[Ke] _i 16. Installation of the Keg Coupler: IMPORTANT NOTICE; Make sure the black pull handle of the keg coupler is in the "upward" (closed) position before installing on the beer keg. See Fig. 9 Insert the keg coupler into the locking neck of the beer keg and apply a 1/4 turn clockwise to lock into position. 17.
PAGE 10
: [ol*AVil lie] :,1:1".,I I&To,]:IF;! _1:1;4 U Ik'io{o),_[o_'d! I_I ;] =: 1. Close the main cylinder valve (A) by turning in a clockwise direction. See Fig.13 9. Readjust regulator pressure (D) (if necessary) between 10 ~ 12 psi/Ibs. 2. Close the secondary shut-off valve (C) by turning to "horizontal" (east/west) position on lower stem pipe. See Fig.13 10. Open the secondary shut-off valve (C)by turning to "vertical" (north/south) position on lower stem pipe. 3.
PAGE 11
Keep a thermometer handy. (adjust temperature control knob accordingly) Periodically monitor temperatures inside your cooler. (adjust as necessary) Keep the refrigerator door closed as much as possible to avoid temperature fluctuations AUTOMATIC DEFROSTING: There is no need to defrost the refrigerator, because ice depositing on ically. Ice build-up on the evaporator during compressor operation; will off) defrost automatically.
PAGE 12
STORAGE ANDHANDLING: • Draught Beer should be treated as a food product. In most instances draught beer is not pasteurized. It is very important that you store and handle it properly. • Draught Beer should be immediately stored in a refrigerated cabinet. • Draught Beer products have a shelf life, which on "average" is 30 days after the keg is tapped.
PAGE 13
Therearetwo(2)standardsizebeerkegsthatcanbeusedinyourChill'NTapKegCooler. 30LiterKeg(1/4Barrel)yields3-1/2cases(1056ozs) of beer.(KegWeight911bs Full) 20LiterKeg( 1/6Barrel)yields2-1/2cases(704ozs) of beer(KegWeight541bsFull) Note:Thekegstandis requiredonlywhenusingthe30litersizebeerkeg. IMPORTANT NOTICE: Beeris easilyavailable withDanby'snewKegCoolerRefrigerator, however, it is notintended to beavailabletopeopleunderthelegalagetoconsumebeer.
PAGE 14
_o] _LvJ:lr,t i I_[€']i I" I:[_]" Il! lid _II It:1"J[4 :[€'[e[oIo] I! :1:| _o1:1 :Y:_ [_:I ! q :__ _ :_[_ _ :;:_ |o] _ The Chill 'N Tap Keg Cooler is designed to offer you quick and easy conversion from a beer dispensing unit to a basic compact "All Refrigerator" application, Simply follow the below steps; 1. Close the main valve on the CO2 cylinder. 2. Close the secondary shut-off valve (horizontal position) on the regulator stem pipe. 3.
PAGE 15
nby ° LIMITED PRODUCT WARRANTY This qualityproductis warrantedto befree frommanufacturer'sdefectsin materialandworkmanship,providedthat theunit is usedunderthe normaloperating conditionsintendedbythemanufacturer. This warrantyis availableonly to thepersonto whomtheunit wasoriginallysoldby Danbyor byan authorizeddistributorof Danby,andis non-transferable. TERMSOFWARRANTY Plasticparts(ie.