Specifications

Installation Preparation
MATERIALS YOU WILL NEED (INCLUDED)
• 2 #8 x 5/8” flat head wood screws to secure dishwasher
to underside of countertop.
• Strain Relief for electrical connections.
TOOLS
•
Head screwdriver
••
5/16 nutdriver" " and
6" wrenchAdjustable
••
Level
•
Carpenters square
•
Measuring tape
•
Safety glasses
•
Flashlight
•
Bucket to catch water when flushing the line
•
15/16" socket (optional for skid removal)
Gloves
•
Tubing cutter
•
•
90° Elbow, Ferrule
and Compression nut
Wire Nuts
Waste Tee
Electrical Cable
Hot Water Line
Drain
Hose Clamps
Hand
Shut-off
Val v e
Thread
Seal Tape
Wood Screws
Drill and approprivate bits
Hole saw set
•
•
Air Gap
Level
Drill and Bits
6" Adjustable
Wrench
Measuring Tape
1/4"
Nutdriver
and 5/16"
TCutterubing
Carpenters
Square
Gloves
Hole Saw Set
Head
Screwdriver
Coupler
Strain Relief
Safety Glasses
Flashlight
1
MATERIALS YOU WILL NEED (NOT INCLUDED)
• 3/8” Male (N.P.T.) 90º Elbow.
• Flexible Braid Hot Water Line (Use Engineered Polymer
Braid type hose designed specifically for dishwasher
installations only, available at most Hardware Stores)
DO NOT USE REGULAR (TYPE) RUBBER HOSE OR
GARDEN HOSE FOR INCOMING WATER LINE.
• Hand Shut-off Valve (5/8” O.D. tube x 3/8” O.D. tube)
• Seal (Teflon) Tape
• Electrical Cable (12 ~ 14 Gauge Wire)
• Wire Nuts (for 12 ~ 14 gauge wire)
• Air Gap Kit (depending on drain method used)
• Waste Tee (depending on drain method used)
• Drain Hose Clamps
• Drain Hose Coupler
1/4
Dishwasher Approved
Flexible Braid
Drain Hose