Universal Module V3 www.danalock.
Specifications Operating voltage range Current consumption (at 24V) Number of relays Type of relays Max relay voltage Bluetooth® range 12-24 V DC 100 mA 2 Potential-free contacts (NO/NC) 48 V 5 - 10 meters 3
Wiring Click commands Set up your Universal Module according to this schematic. You can configure the Universal Module via the button found in the small hole on the module. When you get to the setting you want, wait for 5 seconds and the Universal Module will react. If you make a wrong number of clicks, just stop at an unmarked number of clicks and wait for 5 seconds. The LED will flash red. Use relay 1 before relay 2 if possible. Power output: Ground Power output: 12-24 V DC max.
LED signals LED mode 3 sec constant white Constant purple Blinking blue light 5 sec blinking white light 5 sec constant red 5 sec constant green followed by green blinks 6 LED color Status indication Power on Firmware update activated Settings changed Identify Factory reset Inclusion/exclusion mode activated 7
Simple Guidelines Please follow these guidelines when configuring, using or recycling the Universal Module V3. Violating these guidelines may be dangerous, illegal or otherwise detrimental. Further detailed information is provided in this manual. Terms of use This equipment design is primarily for indoor use mounted on a standard garage door motor.
Danalock Universal Module V3-BT Product specifications Supply voltage Temperature range Mechanical specifications Material Radio interfaces Active operating mode Storage Dimensions (W x H x L) Weight Plastic Bluetooth LE 12-24 V DC -20ºC to +40ºC 5ºC to +50ºC 17 mm x 38 mm x 35 mm 14 g Black PP Max.5.1 dBm E.I.R.P US and Canada certification marks This device contains radio transmitters that comply with CFR 47 part 2.1091, part 15.207, Part 15.
Danalock Universal Module V3-BTZE Danalock Universal Module V3-BTZH Product specifications Product specifications Supply voltage Temperature range Mechanical specifications Material Radio interfaces Active operating mode Storage Dimensions (W x H x L) Weight Plastic Bluetooth LE Z-Wave 12-24 V DC -20ºC to +40ºC 5ºC to +50ºC 17 mm x 38 mm x 35 mm 14 g Black PP Max.5.1 dBm E.I.R.P Max 8.0 dBm E.I.R.
Danalock V3 BTZU Product specifications Supply voltage Temperature range Mechanical specifications Material Radio interfaces Active operating mode Storage Dimensions (W x H x L) Weight Plastic Bluetooth LE Z-Wave 12-24 V DC -20ºC to +40ºC 5ºC to +50ºC 17 mm x 38 mm x 35 mm 14 g Black PP Max.5.1 dBm E.I.R.P 89.4 dBµV/m @ 3m (Average US and Canada certification marks This device contains radio transmitters that comply with CFR 47 part 2.1091, part 15.207, Part 15.
Danalock ApS Gammel Stillingvej 427C 8462 Harlev, DK +45 4242 8122 info@danalock.com www.danalock.
